Please enter your email address and password below.
ESTABLISHED 1976 EXC VAT INC VAT
USE OUR SECURE CHECKOUT 24 HOURS A DAY
At UKAA, we offer a wide selection of antique radiator valves. From manual radiator valves to thermostatic radiator valves, our large range ensures to fit all of your cast iron radiator fittings needs.
Our range of period, modern and contemporary valve styles includes straight, angled and corner radiator valves. See our range of finishes including traditional brass radiator valves, satin nickel, antique copper, old English brass, pewter, black nickel and antique brass.
We also supply TRV traditional radiators valves. These are designed to use with column cast iron radiators for bathroom towel rails and towel radiators. When you buy a pair of UKAA’s radiator taps, they will always include one lock-shield.
£0 (inc VAT)
£0 (exc VAT)
£67 (inc VAT)
£55.83 (exc VAT)
£78 (inc VAT)
£65 (exc VAT)
£28 (inc VAT)
£23.33 (exc VAT)
£71 (inc VAT)
£59.17 (exc VAT)
£55 (inc VAT)
£45.83 (exc VAT)
£69 (inc VAT)
£57.50 (exc VAT)
£42 (inc VAT)
£35 (exc VAT)
£70 (inc VAT)
£58.33 (exc VAT)
£72 (inc VAT)
£60 (exc VAT)
£82 (inc VAT)
£68.33 (exc VAT)
£40 (inc VAT)
£33.33 (exc VAT)
£66 (inc VAT)
£55 (exc VAT)
£63 (inc VAT)
£52.50 (exc VAT)
£60 (inc VAT)
£50 (exc VAT)
£114 (inc VAT)
£95 (exc VAT)
£134 (inc VAT)
£111.67 (exc VAT)
£122 (inc VAT)
£101.67 (exc VAT)
£99 (inc VAT)
£82.50 (exc VAT)
£43 (inc VAT)
£35.83 (exc VAT)
£81 (inc VAT)
£67.50 (exc VAT)
£30 (inc VAT)
£25 (exc VAT)
£59 (inc VAT)
£49.17 (exc VAT)
£58 (inc VAT)
£48.33 (exc VAT)
£62 (inc VAT)
£51.67 (exc VAT)
£54 (inc VAT)
£45 (exc VAT)
£29 (inc VAT)
£24.17 (exc VAT)
At UKAA, we have many styles and types of cast iron radiator fittings to suit your pipework, including angled, straight and corner radiator valves. They are also available with standard 1/2", 3/4" and 1" bsp fittings, with either 15mm or 22mm copper pipe inlets. Sounds confusing? That's why we are always here to help.
We offer a worldwide shipping service to supply your cast iron radiator valves wherever you reside. If you need any more information on our cast iron radiator fittings, contact us on 01543 222 923. Looking for more Cast Iron Radiators for your collection? See what else we have to offer today.
If you want to control the temperature of an individual room, thermostatic radiator valves let you do just that. These regulate the central heating’s flow, letting you set your own desired temperature.
Do your pipes come out of the floor? If that’s the case, we suggest you use angled radiator valves. These are the most commonly used radiator valves in the UK, connecting to pipes at a 90° angle. Angled radiator valves are less visible than other alternatives, making them ideal for saving space.
If your pipework travels along a wall, straight radiator valves are the best choice. With straight radiator valves, water travels in a straight line directly into the radiator, rather than at an angle.
If your radiator pipes come out of the wall, we recommend you choose corner radiator valves. Often chosen simply for stylistic purposes, corner radiator valves don’t stick out as much as angled valves, essentially minimising the risk of hurting yourself by accidently catching onto a valve. Additionally, sleeve or shroud kits can also be used with corner radiator valves.
A thermostatic radiator valve (TRV) is a self-regulating valve fitted to a hot water heating system radiator, used to control the temperature of a room by changing the flow of hot water to the radiator. The room temperature is set by twisting the thermostatic head. Thermostatic valves make a very popular choice, combining efficiency with style.
The classic thermostatic radiator valve contains a plug, typically made of wax (forming a wax motor), which expands or contracts with the surrounding temperature. This plug is connected to a pin which in turn, is connected to a valve. The valve gradually closes as the temperature of the surrounding area increases, limiting the amount of hot water entering the radiator. This allows a maximum temperature to be set for each room.
As this type of valve fitting is designed to sense the temperature of the air surrounding it, it is important to make sure that it is not covered by material, such as curtains.
The replacement of a manual heating control with a radiator TRV has been estimated to save at least 280 kilograms (620 lb) CO2 per year. They are also considerably cost-efficient and can reduce heating bills by up to 17% a year.
Most of the thermostatic radiator valves come with a radiator coupler ½” BSPT male thread. However, we can also supply some valves in ¾ inch BSPT male thread. Building regulations state that new dwellings should be fitted with thermostatic valves.
Contact us for more information about TRV fittings and regulations.
Manual radiator valves make a very popular choice as they combine ease and efficiency with style, making them a perfect complement to your cast iron radiator. With a manual radiator valve, they are either open or closed, and they will remain at the set temperature. You can also completely close a manual radiator valve, and there is no need to use a decorator’s cap. Our range of manual valves include:
• Faringdon • Brunel • Telford • Whitworth • Newton • Amberley • Milan • Carron Throttle • Crocus • Abbey Throttle • Abbey • Bradley • Daisy • Brumpton • Westminster
Additionally, our optional extras of sleeve or shroud kits also work with the manual radiator valves as well as corner radiator valves.
• When screwing the valve tail into the bush, turn it finger tight. Using a spanner, turn it until there is only moderate resistance. Please note that by using a 4” (100mm) spanner, it becomes difficult to over tighten but it is easy to over tighten and crack the bush with an 8” spanner. • A thread sealant must be applied to the valve tail threads to get a water-tight seal on the radiator valve cap. (Sealants are available from your plumber – PTFE tape is an alternative). • You shouldn’t need to unscrew the bushes, but if for any reason you do, re-tighten them gently, enough to create a good fit. We recommend an 8” adjustable spanner to create a good seal. We advise against using an 18” Stilsons spanner when tightening radiator valve caps.
If you need more guidance with fitting your own valves, contact us.
Get the radiator to match. Browse our cast iron radiators today.